How can I clean the mini-retrieve?

mini-toos are a comfortable and attractive treatment of windows that have replaced the old-fashioned Venetian blinds. The only attraction back to this window cover is to find an easy way to keep it clean. Most people avoid cleaning their mini-blinds until they actually change color, when they must be easily cleaned. It is best to use chemicals rather than physical strength to clean them.

Before removing the mini-blind from the window, plant them with attaching the hose on the vacuum cleaner. This removes excess dust and residues. Close them in both ways to vacuum both sides before you take them off. Remove the blinds out of the window and check that they are not damaged or an unusual amount of impurities or residues that might require special attention. Weather permits, you can clean them outside. You will need a hose, a linen cord (or something in which you can in a fashionable cord), a bucket and a sponge. Use a bucket to create a mixture of one part of water per poisonNu part of ammonia and wipe it on mini-blind, front and back. You should not scrub hard, unless the blinds are terribly neglected or let the hint of hanging in the kitchen accumulate. Leave the mixture to stand for about five minutes, and then simply pull them. If necessary, wipe the mini-punch with a soft cloth or paper towel and then hang them on a clothesline.

If it is an internal role, you will clean your mini-release in almost the same way using a bathtub. Wipe them with a mixture of ammonia and water, leave them for a few minutes and then rinse them with a shower connection or simply start the shower. If your bathtub is separated from the shower, fill the bathtub enough to rinse the blinds thoroughly. After you clean your mini-blind, take them out and hang them on the lingerie or through the railing. If you have to hang them in, you can use a shower hanging rod or you can place prolongedAt the rod to any door jam. They often save time to clean many mini-blind sets at once; Just make sure you have room for drying. Remember, let them open to dry quickly.

Before re-affecting the mini-blind, check them in detail to make sure they are clean and dry. To prevent future dust accumulation, wipe them with an antistatic dryer. Then just carefully interfere with them.