How can I repair whistling floors?
While the whistling floors of old hardware store or dance halls can be evoking and nostalgic, whistling floors in your own house can be unpleasant and unpleasant. Removing the Squeaky floor source is not always easy for amateur maintenance, but there are several user -friendly methods with minimal investment in the elbow equipment or lubricant. The key to fixing the whistling floors is to identify the exact noise source and provide fixed repair, not temporary patches. Most floors in modern homes consist of several layers. The lowest floor level is floor beams that are solid rays similar to the fronts behind the walls. These floor beams can start to sag or settle over time, which may be the main cause of some whistling floors. If the floor beams are sagging significantly, the beams may have to be replaced professionally or raised from below. Like the pins in the wall, these beams must remain at the level for maximum supportru.
ABOVE level of floor beams is floor flooring. Subflooring usually consists of large plywood boards nailed directly to the beams. After years of continuous use, floor panels can be released from floor beams.
Some whistling floors are caused by free nails between floor and floor beams. If you want to repair these types of whistling floors, you may need to install wooden pads between the upper part of the floor beams and the bottom of the flooring. Some experts consider pads, angle pieces of scrap, temporary repair. They propose to connect the wooden board to the floor beam and the bottom of the floor to stabilize it.
The source of whistling floors can also be a real floor above the floor flooring. Many hardwood floors are designed with individual boards for tongue and incitement. If the flooring becomesUneven, floorboards begin to form high low spots.
When two boards slide up and down against each other, friction can cause whistling floors. One solution is to apply the layer of powder graphite through the whistling part and incorporate into the grooves with a towel. As slippery graphite fills the gap between the tongue and the groove, the whistling should be reduced.
The mechanical way to repair the whistling floors is to pass a nail of short floors through free boards and to flooring. If the floorboards cannot move, they cannot growl. Some experts propose to drive two nails at contradictory angles of 45 degrees to hold the boards more securely. If the floor of the carpet, it may be necessary to reduce a small hole for accessing the boards and control the nail under the floor surface.
Squeaky floors can be a sign of a larger problem of settling or foundation, so look for other symptoms such as cracks in walls or doors that are no longer closed properly. If you can't ur urČIT its Squeaky Floors source, it can help start up from bottom to top. Check out the floor beams from above and down to make sure they do not move or deform. You should also be able to see the bottom of the floor floor above the floor beams. Take a look at the gaps between flooring and beams, especially with any exposed nails. Some repairs on whistling floors can be made from below, which can save you difficulty in removing carpets or individual floorboards.