How can I paint concrete?
concrete, itself, is rarely beautiful. Something other than the gray size of gray depends on you. However, the first thing he must realize before the start of concrete painting is that all concrete is not created. Some of them represent a surface that is smooth and rigid; In other cases, older concrete can be built and porous. The concrete -specific spots filled the niche in the painting industry, even if they penetrate and fill the niches on the surface that are designed to cover. Unlike concrete color, the concrete spot is forever. Some varieties even form a chemical bond with the concrete itself. Decision on which color to dye the concrete surface must be the last.urface for a short time, especially in areas with high operation. Experts on painting or dyeing concrete recommend that the color does not apply until the surface has at least a week - and according to some, up to 28 days - to dry and cure. The cure of the compounds to accelerate the setting process of setting and drying have been developed. ProblemIt is that these compounds can often maintain colors in proper adherence.
One solution is etching acid. After the surface was cleaned with dust and fat (if necessary with power) and a mistake with a cleaning solution, a diluted solution of muriatic, phosphorus or sulfuric acid, generally with a mop or spray unit, is applied to prevent contact with the skin. This solution creates a rough surface more receptive to painting or stains.
moisture is the primary enemy of painted concrete floors. If the pissaku areas are not solved with the Before color is applied, the water is built under the color and causes the blister. The application of the seal is the most direct way to respond to this problem. Once it is done, some types of color “breathe” to evaporate the moisture.
There are literally dozens of types and stains that can be used to paint concrete, from bright colors to earth tone spots, ktEré gives concrete a natural look. The epoxy color is another viable option.
Generally, it is recommended that several layers of color should be applied in thin layers to ensure that irregular areas are properly covered. For painting concrete (or spotting) it requires a lot of work, in other words. But the alternative is gray.