How can I remove linoleum?

Linoleum could have been rage in the age of 40 and 50, but at the end of the 19th century it first appeared as a domestic floor. Before the arrival of vinyl or laminated wooden floors, linoleum was considered desirable for several reasons. It was cheap for one thing. For others, it was highly durable and held well in high traffic areas. It can be significantly time consuming and difficult to remove the linoleum floor. The biggest obstacle that most homeowners encounter when they remove the linoleum of the floor is purely separating from the substrate. This is because the adhesive used to secure the linoleum often combines the ground that it is actually absorbed. However, if you need to remove the linoleum from the concrete, your task may be a little easier.

Another aspect is as Linoleum was staped. Usually the whole subtor is covered with glue before the linoleum is determined. Sometimes, however, only the outer edges of the floor were covered with glue. The other does not necessarily facilitate removal, alE should take less time.

If you want to start removing linoleum, first cut the linoleum into strips using a commercial knife. This step should be followed regardless of the type of substrate below it. Next, pour boiling water through the linoleum and wait a few minutes. This will help soften the adhesive and allow you to play pre -cut strips. This process is a bit messy, so you may want to work in sections rather than deal with the whole floor at once.

If the subnine is made of wood instead of concrete or plywood and want to keep it, you should use an alternative heating method and softening the adhesive. One way is to use a thermal gun and work again in sections, as you are removable linoleum in strips. In addition, exercise while cutting linoleum into strips and always cut in the direction of grain into wood.

Once you can remove all linoleum you will need toReturn to work on areas where the adhesive remains remain. The adhesive will be quite difficult, so you will need a scraper to remove it. After you have successfully removed all glue, you can smooth the floor of an electric or pneumatic grinder. Otherwise, if you have decided to completely remove the floor, you will have to replace it with a different material than you can lay your new floor.