How can I repair the holes in the walls?
If you find that you need to repair the holes in the walls, remember that there are different methods depending on the size of the hole and the material from which the wall is designed. If they are not too large or if you are at hand around the house, you can repair holes. If the holes are large or if you are not completely proficient in terms of projects, consider requesting help or hiring a professional.
If you are on the task, first check out the hole or holes that need to be repaired. A small hole, such as those caused by nails, screws or dings, can be easily repaired. Everything you need to repair holes, such as these, finger or smaller, is some compound with sleeping, scraper, sandpaper and touch.
Use a small scraper of color to raise a generous amount of compound and apply it to a hole. Repair the holes with a complete fill and then scratch the excess from the area with a scraper. Allow the toosus and grind the area smoothly. Note that different types of mergerNin walls that are commonly used to repair holes when drying.
After repairing the holes, if shrinkage is recorded, apply a second generous coat of the compound. Once it is dry, smoothly grinds the surface and wipe all the grinding of the residues. Paint the area to match the rest of the wall. This is a good reason to store the residual color after the painting project.
If you want to repair holes that are larger or strangely shaped, you may need to cut a larger hole. First pick up some notice board - or plasterboard or sheetrock - or use scrap. Cut a square or circle using a puzzle. Follow this piece through an existing hole. Cut the wall into shape and stay inside the lines. Before you insert the patch into a circle or square you cut off the wall.
The easiest way to apply support is to slip a small, thin board or a piece of wood into a hole. Cut it over the back of the hole and connect it from the face of the wall with small screws or nails. Apply a piece of repair, apply the mixture and continue as directed. When the project is completed and the mixture and the color are dry, remove the hardened screws or nails. Just repair the holes created by screws or nails with a dot and the work is done.