How do I build a library?
One of the simplest and most beneficial projects for building houses is about to build a library. Although it is quite easy to build on their most basic, you can create a library at almost any level of complexity, which makes them ideal for people who want to evolve as house builders. At the same time, it has almost every book, so the announcement of the library is an extremely practical project. Rather than spending a large amount of money on pre -made shelves, it is easy to build a library with affordable wood and several connectors. You may also want your project to complete sandpaper, colors, glue and wood filler. Although you do not need a large amount of space to build a library, you will cut wood, so you want to be either dirty, or somewhere you can easily blacken sawdust Z. Put down for three or four hours to create a library for the first time, even if you have the foundations down, it can be easy to do in an hour.
If you want to start, decide where your library will go and measure the area to find out the dimensions you want your case to be. Also, if you have the books you want to use the case, measure the largest of them to make sure they can fit on your shelves. Large books can have depths that are unsuitable for a thin case, and their height can also be a limiting factor. Many people decided to build a library with one or two shelves that have more space than others to suit the limited number of oversized books.
Let's look at what would be needed to build a very simple design; Basic four hiding library. This will require eight pieces of wood, including the backboard in a case that could be omitted if it is detained on the wall. Three of our shelves will have one leg (30 cm) vertical space for books, while the lower shelf will have one and a half feet (45 cm) space for excessive books.We will use ¾ inch thickness (1.9 cm) and our library will have a foot depth (30 cm).
First we want to cut all wood, or leave someone in a lumberjack yard, it will cut it for us. For the end we will need two pieces that will be for our four shelves and the bottom piece. Then we will need four pieces, three for the central shelves and one of them will want, in this case we want, in this case we will want, if we want, we will need four pieces. Back, we will need a large piece of wood to cover the entire area, 57 ”(143 cm) by 37.5” (95 cm).
Once we have wood, it's a simple design of that library. Place the side pieces and use the square to align the shelves. The adhesive can be useful at this stage to determine the shape of the library without accepting any solid obligations. Once everything is arranged and on the other, bolts or nails can be used to secure side pieces to the shelves, two of them passing on each sidefor each shelf. Finally, the rear part can be connected to glue, nails or screws and the whole thing can be lifted.