How can I build a pergola?

Pergola building can add a character to any house. The choice of the right timber used to compare existing characteristics and personality in your house is only one part of the decision -making process. In order to be a do-it-yourself project, it will be necessary to have a little experience in working with wood. So, if it is the first time to work with wood on this scale, it would be wise to find information that would help you learn about what electric tools you need and how to use them, how to draw plans and specifics to make sure that the pergola is to build a foundation. Obviously, if you build a pergola over a concrete terrace or around the rear deck, you will have to know how the base of the concrete slabs was poured. Since the size of the first beams that rise is at least 4-4-4-inch (10.16 to 10.16 cm), it is important to the correct basis with the depth that it is the most important problem. Before you kick the first hole, measure the width and depth of an area thatOu Pergola will cover. This will help you determine the length of the necessary beams.

Another thing that must happen to build a pergola is to have a good design to work with. Begin with measurements made by the width and depth of the area to be covered. With these numbers in your hand, grasp some graphic paper and draw plans in a way that is easy for you to understand. Graphic paper allows you to draw plans on a scale where each square on the page represents a certain measurement.

Now that you know how long the beams that will be your posts is time to decide how much you want to hang over the heads at the end of the terrace. Set posts to the ground first kick a hole that at least 24 inches (60.96 cm) deep and about twice as wide than your posts. Place them in a hole while the concrete mixture is poured around the post. Use handling to pack the dry mixture as strictly as possible. This is called a dry package. LIdé use this method because they save the day waiting for wet concrete to set up. If you prefer wet concrete, then mix it to the necessary strength and pour it into the hole around the columns. In both cases, Plumb must be posts. To do this, it places the level of the carpenter 36 inches (91.44 cm) on all four pages of the post to make sure it is plumb.

Once the posts are set, measure the distance between them and secure the beam between the two columns and the columns and the house. There are many options for how rays can be attached to posts. Examine different methods to determine which one suits and use them. Make sure you install the beam between the posts next to the house because you will need a place to hang the cross members.

Devy the space you want between each of the members of the cross and mark two rays that will adequately support Cross members. Furthermore, measure how long the members must berises and reduce as much as you need. The way you install them will be up to you again. You can use beam hangers, but then you probably want to cover them because they are made of galvanized metal and will reduce the character of your pergola. It can be such a beautiful and functional part of any home that once you learn, there are many reasons to build a pergola you can enjoy.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?