How can I take care of the beaver hat?

Bobver hat requires regular care and maintenance. Careful handling during wear, cleaning of brushes and storage in a cool and dry place can withstand them. They are made from an underground beaver that is pressed and steamed, creating a dense, light felt. Beaver Fur, often used in cowboy hat, is quite resistant and resistant to water, which is ideal for outdoor use. Handling a hat in the crown can lead to a loss of shape. When the hat is removed, it should be placed upside down on the top of the crown, as its adjustment to the edge can cause the edge to flatten and requires the hat to change. At night, the owners should place the hat on a special -purpose stand or in a hat for a hat to help keep its shape and allow it to broadcast. A soft brush or a damp ferry clot can be used to dust the hat. This is best done by gently friction of the circular direction counterclockwise. Remove any fibers or hats on the hat with leptIva side of tape or brush.

If the hat is colored, rinse it with cold water and then gently cover them with a damp sponge. Harder spots can be removed with rubber. If none of these methods work, use sandpaper with 600 or finer grip. Sandper must be very finely applied and wipe against the clockwise direction on the top of the hat, including the crown and the edge, and clockwise on the bottom of the edge. If any material holds the hat, allow it to dry completely before slightly scraping it.

When the hat is soaked, let it dry naturally and thoroughly. In particular, if the sweat zone becomes wet, the hat should be dried inside the hat pointing upwards so that the moisture evaporates than to soak into the material. Do not build a hat next to the heat source to dry as it can cause leather sweat.

while storing a hatKeep it somewhere cool and dry somewhere to prevent the shape from losing. This type of hat should also always be stored from direct sunlight to prevent fading. It is best to store a beaver hat in a slightly open bag or adapted box to prevent dust and mold, while allowing air circulation.