How can I take care of the trumpet valves?
care for trumpet valves is usually a very easy and direct process, which includes the use of special lubricating oil and other occasional maintenance. The oil is the most important part, not only to ensure that the valves work properly while playing, but also to prevent further damage to the corner. Regular cleaning of valves, with professional cleaning at least once a year, may also be a way to extend the life of the valves.
The most important part of the trumpet valves is simply leaving them properly oiled. In general, it does not hurt that the trumpet valves will make up before they play, even if it plays it daily. It is also quite possible to skip a day or two every moment and then for comfort and save the need for more valve oil. When it comes to oil application too long, sticky valves can be sticky and even abrasive inside the housing.
In addition to the oil oiling, it may also be necessary to clean them with a cloth without a fiber once in a while. This is particularly importantLive, if after oiling valves still tend to stick inside the valve sleeves. This could be because the dust, fibers or some other types of residues glued to the valve surface. The use of a dry cloth is generally all that is needed, but the damp cloth does not hurt the valves. If water is cleaned for their cleaning, do not forget to seal the valves generously generously.
More thorough annual cleaning can also help maintain tubular valves in optimal state by removing the lime and copper carbonate. This accumulation tends to reduce valve performance and could eventually lead to other problems due to abrasion. This type of cleaning should also take place after a long release of the year or more to ensure that everything is in the correct workstate.
valve bumpers can also replace time from time to time. These pieces of tools are made of felt or felt of a similar product and are located at the top of the valves. When the valve is compressed, the finger pad hits the bumper. Without bumpers could pPost -finger delay cause irritating noise and possibly listeners for players.
If these simple steps are maintained, trumpet valves can last more than ten years. In some cases, as soon as the valves are aging, they could be rebuilt if the problems are not very serious. This requires a professional and the instrument should be transported to a trusted correction device.