How can I choose the best flooring in the basement?
The best floor seal in the basement is the one that repairs all existing defects in the concrete slab and at the same time serves to increase the overall purpose of the room. The sales, which is susceptible to water leakage and standing moisture, should be treated with a penetrating seal that can fight these problems. Individuals who want to create a finished look in this area of their homes, but are not afraid of water problems should use an epoxy seal.
The basement floor is usually made of concrete. They are poured directly against dirt and serve as the foundation of the house. This type of material is semi -porosure that allows ground water to be sinful and enter the house. The use of a good sealing floor on this area can prevent excessive accumulation of water in the living space.
The basement seal differs from concrete color. Many brands approved for concrete use also claim to provide a moisture barrier. These colors, while the thorny to prevent soak in concrete,They are not strong enough to prevent large amounts of water vapor from leaking through the floor. Sealing substances are generally clear and are marked for use only as sealant and not for any other projects to improve home.
penetration sealants are the best type that needs to be used to prevent water leakage, which is a common problem. This type of sealing floor floor can be soaked by pouring the floor plate up to a depth of 4 inches (about 10.2 centimeters). The chemicals are expanding and binding with lime, which naturally occurs throughout the concrete. A network of crystalline structures is formed that creates a hard and impenetrable surface. Water can continue to condense on the outside of the concrete, but will not travel inside the house.
Using a penetrating sealing gas on the floor, it also prevents the gas damage to the house from the subsoil. Unlike surface sealants that only rest theAt the top of the concrete as a plastic shield, a penetrating sealing binding with concrete creates a new barrier. This chemical is safe for use with any type of additional floor that the owner of the house may want to install. Treated wood, carpet cushions, tiles and vinyl can be observed or placed on this surface without damaging new materials.
Epoxy sealant is the best choice for homeowners who want a finished look for a concrete floor and must not face water. The epoxy sealant is similar to the fact that it is tinted and creates a glossy surface. However, it is much stronger than a standard concrete color and can also fill small nicknames and cracks that can be present in older base plates. Some types of epoxy can also be sold with an uncleaned agent that is ideal for use in areas that can get a high volume of pedestrian traffic.
Acrylic seals and urethan are the most commonly sold chemicals used as a basement seal. ANDCrying seals are either water -based or solvent based on the basis of a thin barrier, which rests on the upper part of the concrete slab. The least expensive type of sealant is available and must often be re -applied. The type of acrylic sealant and the solvent -based urethane is extremely toxic and should only be used if the correct ventilation is available in the work area. These types of sealants are not good options for individuals with respiratory problems or in homes with small children.