How can I choose the best coating on board?
Whether the house owner is interested in protecting his package from elements, or simply looking for an attractive surface, can provide on board coatings. The covers of the deck differ in more than just color - they can also differ in function. It is important to choose a coating on board, which specifically works with the deck of the house owner, and takes into account the degree of weathering, the need for water repellent and other factors. The purpose was to allow the deck to pass elements and "weather". However, until it is applied to the water repellent on board, it is acceptable to coat the deck immediately after installation. Home owners can sinanes water on board and watch the water reaction. If water is absorbed, the deck was not treated with a water repellent; The water that stands, puddles or rolls means the presence of water repellent.
The state of weathering can point to the appropriate choice of the deck coating. Before any weatheringIt is necessary to apply the on -board coating that forms the film, because the weathering threatens the ability of the film to connect with wood, resulting in premature peeling. Piercing finishes, such as those based on oil and result in semi -transparent spots, can provide greater freedom during the applications process. These finishes can be applied regardless of the condition of the deck.
It should be noted that many coatings on board are now considered film formation. Colors, oil, water-transparent spots and latex solvšechny id-cole stains are categorized as film finishes. In fact, even the traditional semitrant spots on the basis of oil were reformulated enough to be considered film goals. In such situations, the reformulations of old mixtures contain a higher solid component due to environmental regulations. So the new wording loses its penetration properties and simply forms the film on the top of the wood.
It discourages solar ultraviolet rays. For this reason, the deck coating will protect the deck from the destruction of the lignin. As a result, the deck coatings remain smoother and together longer.
A good coating on board will have a component repelling water. This slows down the rate of water absorption, but allows the damp parts of the deck to dry as it would normally. If the water repellent component is selected, reduction and swelling and subsequent split may be minimized. Some coatings on board may also contain deterre moldnts.
Clear Deck Surface treatment should also be selected on the basis of their UV resistance. UVS resistance components may include iron oxides. Home owners should remember that the life of clear surfaces may vary. Some clear finishes may need to be re -applied every six months, while others may be used only every three years.