How can I choose the best dimmer switch?
When selecting a dimmer switch, you should first check that it is compatible with lighting settings and selection of bulbs. Then you should decide which style is best for you and whether you want to pay extra to avoid unwelcome side effects such as buzzing and interference radio. Finally, you have to make sure that the dimmer switch has sufficient power rating for the lights you will use with. This means that the tension is constantly rising and falls into a consistent pattern. The dimmer switch cut off the bulb circumference every time the pattern changes the direction. The higher the switch is set, the faster the circuit turns back. This changes the amount of energy supplied to the bulb and thus the brightness of the light.
Most dimmer switches are not compatible with energy saving bulbs. This is because such bulbs work in a different way than ordinary fibers. The energy saving bulb contains glass tubes covered in phosphorus. When electricity passes through these bulbs, the gas gives out ultraviolet rays,that turns on phosphorus. When using the dimmer switch, these bulbs simply turn on and off. Although there is an effort to solve this problem, so far the closest solution is to use switches that allow you to choose from two or three fixed brightness levels.
There are three main styles of dimmers switches. The most common is the type with a rotating switch, which rather than simply setting on and off, allows the user to turn the dial to gradually change the brightness of the bulb. Another type is a touch dimmer where the user simply touches the board. This can function as a transition to a cycle with a few pre -set brightness levels. Alternatively, the user can push down while the bulb gradually increases or reduces the brightness and then go letting as soon as they reach their preferred environment. The third style includes remote control, sometimes controlling two or more different sets of lights.
as well asA more elongated dimmer switch is not always the best choice. This is because rapid changes in the voltage supplied to the bulb can cause excessive vibrations in its fiber, causing potentially preventing buzzing sound. Because the fiber is magnetic, this effect can also cause some interference on nearby TVs and radio. The better switch to the dimmer will include devices known as inductor shock absorbers or interference capacitors. These can smooth out the effects of changing voltage and thus remove the buzzing sound.
Each dimmer switch comes with the rating of the power input. This will tell you the maximum watts of bulbs that you can control with it. It is not only advice, but rather an important limit that needs to be followed, as its violation can risk serious damage. Pay special attention to setting up more Bulbs from one switch. You will need to add the power consumption of each bulb in question.