How can I choose the best electric greenhouse heater?

Select the best electric greenhouse heater by selecting a unit with a suitable thermal output for the size of the greenhouse where it will be used, and it is equipped with a circulating fan and an internal protector of overheating. This type of unit is used to maintain even temperature in the greenhouse, so the plants can be grown inside without exposing the risk of frost. The continuous air function distracts the pockets of hot and cold air so that the internal temperature of the building remains the same for every growing table. They are safe for constant use and are designed to result in heat levels that can cause fire fires.

The size of the greenhouse and local climatic conditions tends to determine what the heating element of the size is needed. The electric greenhouse heater can produce between 5,000 and 20,000 Btu heat to operate small to large buildings. Consumers may want to use a heating -up calculator online or in a local garden center that factor inThe size of the greenhouse, the outer and internal temperatures around the structure and the insulating capacity of any lining materials to determine how much BTU is needed to adequate their building. A small greenhouse, such as measuring below 6 feet (1.8 meters) along each wall, usually requires 5,000 to 7,000 Btu. This minimum requirement may vary for regions that experience extreme cold, and for plants that require very warm internal climate for growth.

Electric greenhouse heater with fan, which remains constantly on it, will more efficiently distribute heat than one without this setting. Many heating elements are equipped with only fans that turn on while the unit produces heat. Once the minimum temperature setting is achieved, the heat and the fan stop running until the temperature starts to decline. A fan that stays after the device stops the air in the building of the Noutelál to circulate the air. The heat is blown from warmer areas to cooler, so the temperature is in the whole contradiction and the plants will not disappear or freeze on the basis of their proximity to the heating.

heaters with overheating protection function prevents the device from dangerously hot. The electric greenhouse heater generates a large amount of heat, and when the unit is too warm, it can shorten the cabling of the building and create electric fires. Many greenhouse owners visit their structures several times during the day and are not present to constantly monitor the inner heating element. The built -in overheating function causes the device to turn off automatically when the perimeter of the circuits it uses is, or when the thermal output is close to the levels of fire risk. Owners can safely leave this type of unit all day long from the risk of fire due to poor involvement or too hot housing.