How do I clean air ducts?
air conditioning systems and heating systems circulate air via the network of pipes in the domestic climbing areas. The filters are designed in most systems that capture dirt before entering the pipeline, but over time they also become dirty. The house owner can clean the pipe without professional help by replacing the filters and cleaning all piping covers and pipes themselves with common household tools.
Start the process of developing clean air channels by determining whether the pipe needs cleaning. If grills are covered with fiber or other dirt, the pipe is likely to clean. Although the exterior of the grills seems clean, cleaning may be necessary, and this can be determined by removing the grill and checking the wall around it, where the pipeline contacts the building material. If this area is dirty, the pipe also has to clean. Replacement filters
and a number of common tools are required for tasks. The owner of the house will need gloves, soft brushes, rags, screwdriver Avosiser. It is also necessaryConnecting a hose for a vacuum with a brush head for a hose.
Turn off units of heating or air conditioning before you start cleaning the air pipe. After switching off, remove and check the air filters in the unit. The filters should be replaced at a proposed filter manufacturer or every six months. If the filter appears dirty, it is likely to be replaced.
Remove all air pipes and return the venting covers. This will require a suitable screwdriver and carefully removes the screws to prevent them from throwing them into the pipeline. Clean air ducts do not remain clean if the pipe covers are dirty. Use a soft brush to thoroughly wipe all the surfaces of the grill and then wipe with a damp cloth and wipe the dry cloth again.
Clean air pipes are first vacuumed pipe areas that can be achieved by vacuum hose and brush attachment. Many pipes are made of metal, but some are soft andIt should be taken to pierce them. After vacuuming, gently wipe the pipe and then wipe with a dry cloth. You do not fall moisture in the pipeline. Finally, plant the areas that can be re -achieved, be careful not to fall or leave any cleaning agents in the pipeline.
Replace all pipes and return the ventilation grills. If any of the grill cleaning was made inside, plant the area where the cleaning occurred. Regardless of where the cleaning was done, plant the area around the grills and the retrievable housing.
Dirt is easily captured on the fan blades and on the cooling coils of the air conditioning. It can also be cleaned, but it requires the power supply of units and the removal of fan and target covers. The blades and the fan coils can be cleaned with a vacuum hose and the brush is attached. It is a more complicated work and the owner of the house should consider its ability to fulfill the task before starting it. Professional assistance can be for these areas.