How can I cut firewood?

firewood can be divided into a number of different phases, from the firing of the initial tree all the way through the cut pieces of wood to block. Each phase has its own in and the outputs and the right procedure will lead to well -shaped dry wood, which will be better to burn, warmer and cleaner. Although the strategy varies somewhat depending on the type of cut wood, you can use the same general set of instructions to reduce the firewood of most types. If you pull out the tree yourself, you will have to explore the technique of proper scales to make sure you stay safe at all times. Once the tree is on the ground, you start cutting it into a man -made piece with a chain saw. Do not forget to wear the right protective equipment all the time when you have cut firewood, with glasses, heavy gloves, shoes and clothing covering the upper and lower body. The correct attitude of the chain chain is slightly with its feet, in a way that is comfortable and supports the upper body.

Start by cutting off all the small branches from the felled tree, leaving only a large central suitcase and larger branches that can become firewood by themselves. In general, when using a chain saw to cut firewood you will cut down from top to bottom and the gravitational force naturally pulls one side of the tree from the other. In cases where there is too much tension, this may cause the wood to clamp, in which case you will have to cut off below. Cut the bike protocol that is not so long that they do not fit into your stove or fireplace, and throw them into a pile where they can then be divided.

wheels division is one of the most successful steps when they set out to cut firewood. The longer the bike is, the harder it will be to split, so if you start to start wheels not more than one leg (0.3 m) long. Using Maul, you divide your wheels into healing pieces of firewood. If you are not believedLNE strong, the use of lighter MUUL will bring much better results than heavier Maul, because you can swing much faster and create much more strength.

The easiest way to reduce firewood is to set the bike to a hard piece of the ground to get a small force into the ground. He should sit down from you to make the lever effect work in your favor. Strike the bike once with a violent wound, closer to the edge than to the center, then restore Maul and strike again, in the same place or along the same crack. As the crack develops, start to hit the point along the same fault line, but on the other edge until both edges meet.

As soon as you cut down firewood, it is important to stack it correctly. Fold it on a raised platform, outside the ground and under some coverage to protect it from moisture. Ideally, on the sun's days you should let the sun absorb and dry, as dry wood will be easier and cleaner than wet wood. Some types of wood like oak are easier to divideLess when it is green, so you want to split them as soon as you fall a tree. Others, like most pine, split on dry, so let them dry after their division.