How do I dry the wet crawl space?
Wet cracked space under the house can be an inconvenience and in some cases danger. Problems that are commonly associated with a damp or wet climbing area may include molds, molds, sill and sill and beams, insulation contamination and harmful insects. The drying of the wet crawl space requires a determination where the water enters the climbing area, engaged in the common causes of browsing, cleaning the space and taking steps to reduce moisture in the climbing area. The entire crawl space may be affected by problems with moisture or moisture can only be present in parts of the crawled area. Water often leaves signs or stains where it enters space, and visual control can help find these tracks.
After determining where the water comes, it is the next step to consider and solve Common's causes of moisture. Incorrect oblique soil that drains towards the building, missing troughs of rain, gutters without drop or decreaseThe water, which does not lead water from the building, and condensation or sweating from water pipes, are all common causes of problems with crawl spaces.
Once the cause of the wet crawl space is identified and repaired, the next step is to clean the climbing area. If possible, it is good to ventilate the area before cleaning. It may also be good to wear protective equipment such as respirator or mask. These steps can help you protect you from exposing molds, dust and rodents during cleaning.
Remove all residues in the climbing area within the cleaning process. Old wood, cardboard and storage boxes can be found in the climbing area. It is important to remove these things because they can hold moisture, mold and mold. Remove any insulation, especially glass fiber insulation, which can also be contaminated by moisture or mold. Glass fiber insulation can have mold cultivation in it, once exposed to moisture or water. During cleaning, anything that can hold moisture, mold or mold should be removed.
The next step after cleaning the browse area is to consider steps to maintain the climbing area and to reduce the moisture of the space. Installing the pump for crawling spaces can be useful if high water or underground spring continues to cause water problems. When reducing problems with the humidity for browsing, the space dehumidifier may also be a useful passing. Some buildings may benefit from the installation of a heating channel or cooler in a climbing area, especially during colder weather.
The cake area, which has only dirt or gravel floor, may benefit from the encapsulation of the browsing space. This can be achieved by installing the moisture barrier on the floor and in a partial way upstairs do not make it possible to prevent moisture from climbing from the ground and into the climbing area. Browsing spaces that have an insTalerian tubes in space
These steps should help with many problems with wet browsing. Some crawl spaces may require the waterproofing of the foundation to be resolved; Others may require drainage to take water from the building and prevent it from entering the climbing area. This is usually just a problem when the building sits on the ground with a very high water surface or underground springs.