How can I fix the clogged toilet?
Of all the drains in the house, most people hope that the one that remains completely without clogging is toilet outflow. A clogged toilet often spells the beginning of a very unpleasant chain of events, from the identification of the cause to the deletion of the plug itself. Some repairs may require the services and equipment of a professional plumber, but there are things that the homeowner can do to repair the clogged toilet itself.
First of all, it may not be a torture test. An amateur plumber assigned to this task can always wear protective equipment such as rubber gloves, disposable mask, safety glasses and waterproof shoes. It may look like an excessive but to repair a toilet containing human waste and other undesirable materials requires the same measures as any other handling of hazardous substances. If you have doubts, please suit.
The next step is to determine the source of clogging. This can often be done inInspective inspection, if necessary, followed by hand inspection of gloves. Sometimes it is clogged caused by a small object such as a toy or mobile phone falling into the toilet and partially captured in outgoing runoff. If such an object is a physically blocking toilet drain, the repairman should try to pull it out and observe the flow of water. If the water remains backed up, the drain system can be blocked. For a professional plumber, it may have to be called to remove deeper clogging.
If there are no objects that visibly block the drain, the next step may be the use of the piston, also known as a plumber assistant. This simple tool consists of a large rubber suction cup connected to a wooden wand. The rubber suction cup is placed over the hole at the bottom of the toilet bowl and the repairman is forcibly plunged on the stick. This action forces the water pressure to increase the dragly to release clogging. Pulling back on the piston creates a vacuum, which can also help pull clogging from the outflow. NThe boreholes with a plumber helper should release a majority of small seals.
If none of these measures prove effective, the home repairer can use a flexible metal coil known as plumbing snake . The snake can be introduced through the drain hole at the bottom of the bowl and carefully pushed through ceramic internal function and finally into the drain pipe that connects to the outer sewers. Most plumbing snakes sold for home use can only travel for a short distance, so it may be necessary to call a professional plumber if it is not easy to achieve clogging.
In the absolute emergency situation, the entire toilet can be removed by turning off the water supply valve, emptying the bowl and the tank, unscrewing the anchor screws located near the floor and lifting it completely from the sewer pipe. Be prepared for a very wet clutter at a toilet to move. You should also end the sewer pipe either a plastic cap designed for this purpose, or by a towel to a cloth store. Clogging can then be addressed elsewhere or the plumber can check the sewer tube for blockage. Fortunately, most clogged toilets can be unclogged long before they need to be completely removed.