How can I fix the stuck garbage disposal?
Connecting the disposal of garbage stuck usually requires the removal of a foreign object stored in the abrasive shoulder blades. First, make sure that a slight goose noise is heard when trying to control the device. Next, turn off the power supply and get access to the bottom of the unit by the door door. You will need a hexagic key suitable size to turn the disposal of the garbage back and forth until the foreign object is released. Use a pair of long nose pliers to remove the object from the washable hole and restore the energy to the unit.
The disposal of the waste is usually stuck when a foreign object, such as eating tools or a large bone is stored in the grinding. Fist of repairing the stuck garbage disposal is to ensure that the equipment actually works. This can be determined by turning on the unit and listening to the buzzing noise. If this noise is heard, a foreign object is likely to be caught on the blades.
It is very important to disconnect the power supply before attempting to repair the disposal of the garbage. The device can be connected to the electrical outlet under the sink or connected to the main circuit breaker panel. Determine the location of the power supply and disconnect the disposal before continuing. After disconnecting the power supply, you will need to access the bottom of the disposal through the cabinet door. A mirror and a flashlight may be required to display components at the bottom of the disposal.
Remove all items stored under the cabinet to allow a maneuvering room during this procedure. The head of the Hexa head is located in the lower center of the disposal and can be rotated by the key with a suitable size. Use the key to slowly move the cut blades back and forth until the foreign object is burned. This procedure may require several attempts before the blades are sufficiently released. Once the blades move slightly in each direction, the object can be safely removed.
A foreign object must be discarded when the sink is opened. To this stepYou should use a pair of long nose pliers to avoid injury. Batteries may be required to open the sink. Look for an object and remove it with pliers. Connect the power supply and press the reset button located near the HEX matrix. Start the water in the sink and turn on the disposal to clean all the small pieces of debris.