How do I get rid of the pool eyelashes?

In terms of pool problems, the eyelashes of the pool seems to be the most common. Depending on the type of eyelashes, the removal of the pool can be very simple or very difficult. The most common ways of getting rid of pool algae include brushing, vacuuming and adding chemicals to water. Many experts agree that the best way to deal with the pool algae is to prevent it from developing in the first place. In addition to converting water in the pool into a disgusting green color, it can also allow harmful microorganisms to behave in the water and can be quite slippery surfaces. Green eyelashes are the simplest brushing, yellow eyelashes are a bit more difficult and black eyelashes are the hardest and may require daily scrubbing and brushing. Pools without vinyl lines, such as many underground pools, can be cleaned with a steel brush. If your pool has a liner, as well as above ground pools, you want to use a brush for nylon bristles to avoid damage.

Before you start brushing the pool, it is important to slip the top and remove all eyelashes or freely floating pool residues. Then use the pool brush to scrub all the pool surfaces, although the eyelashes are not visible in some places. After the pool has been thoroughly scrubbed to release the remains, you should let it settle for 30 minutes. This can then be vacuumed and the eyelashes of the pool should be destroyed in the basket from the pool.

Shocking your pool is the next step. The shock from the chemical pool can be purchased in large departments and pool stores and comes in various forms, the most common is liquid and powder. Choose a pool shock depending on the type of filter you have and whether your pool is chlorinated or not chlorinated.

Observe the manufacturer's instructions, add the correct amount of shock to the pool water. The amount you need to add usually depends on the amount of water your pool holds. If you have vinyl line you may want to mix matWater e -series before adding it to the pool to prevent any coloring or bleaching. After adding the treatment, circulate it around the pool with a pool or a similar tool around the pool. At the moment you may want to clean the pool again.

If you want to save headache and frustration from the pool algae solution, you can do some things to prevent the first place to start. First, start the weekly shock modification mode to kill all the new colonies that can be triggered and maintain the correct chemical balance. Also keep the pool clean and free of debris such as sticks and leaves, and toys, skimmeters and pool covers carefully if they are not used.