How can I hang a scarf?
Scarf Valance often adds a decorative touch to the window and can be easily hung after several relatively simple steps. Select the right rod type before you can hang the scarf and install it correctly. Then place all rings, wall lamps or bows in the desired area and do the material through them. Determine the center of the magnifying glass and cover the rest of the material over the ends of the rod. Adjust the end of the scarf and arrange the folds of the material until the desired appearance is achieved.
The scarf hanging is a simple way to dress in the window. This Valance can be added to the window with existing curtains or used to decorate the exposed. These scarves also create an attractive decoration for windows covered with blinds or shades. Almost any long piece of fabric can be used to make scarves. Hanging this type of VALANCE can be a simple DO-IT-YOURSELF project with the right hardware and several common tools.
VALANCE VALANCE requires to maintain the correct appearance of its own withamostal rod. The scarves suspended from the existing hinge will be disturbed every time the curtains are open and closed. It is important to choose an attractive rod because part of it will always be exposed. Safely install the rod at the top of the window and make sure it is perfectly at the level. To complete this step, you will probably need a wireless drill, screwdriver and ladder.
Place any scarves of accessories such as rings, wall lamps or bows in the desired location before hanging the material on the rod. Before hanging up, make sure the scarf material is long enough to cover the top and side of the window. Fold the scarf in half and secure the center of the material into the center of the rod with a pin. Cover the material over the rod and go through it over rings, wall or bows.
Remove the pin attached to the center of the scarf and adjust the swag to the desired depth. Check the sides of the scarf to make sure they are perfectly evenly. It may take several attempts to reach the required privilegeLED. When you have finished with this step, carefully arrange the folds of the magnifying glass. Then arrange folds along the side panels to match the magnifying glass and use carefully hidden fasteners to keep the material in place.