How do I install the shelves on the wall?
The process of installing shelves mounted on the wall is simple. Like most construction tasks, it begins with planning and measurement. Shelves or shelves are then attached to the wall and use either plasterboard anchors for very light shelves or connect directly to the background fronts for shelves that were to carry more weight. Touches are completed to ensure stability and increase the appearance of the shelf. Before installing shelves on the wall, it is good to use shelves on cardboard racks to give an idea of what the completed project will look like. If the shelves have to carry weight, identify the location of the pins behind the plaster or plasterboard, because shelves or their supports will have to be anchored to the studs. This will dictate the location of the support consoles and the shelves that rest at the top. To indicate the wall, a ruler and a level should be used to ensure that the shelves are installed with even pitch and level.
After the measurement, it is time to mount support hardware. Some shelves use metal strips that are attached to the wall and then adapt to adjustable metal holders to hold shelves. Other types of shelves on the wall use mounting screws to hold pre -assembled units of the shelf. Other are simply composed of the brackets mounted directly to the wall. In all cases, the shelves will have to be mounted to the wall.
For the wall shelves on the wall on the light face can be mounted with plasterboard anchors, which are sunk into holes drilled with plasterboard. The anchors are expanded to grab the back of the wall when a screw is made through them. For shelves that hold any real weight, assembly will include the use of Screws, ideally plasterboard screws, to mount the support system directly into the underlying pins. The use of a small drill bit for preliminary drilling of the guide hole can be useful here.
After attaching the assembly hardware, the shelves themselves can be installed. Pre -assembled units do not require any further work. The shelves mounted on the wall that is held by holders requires one more step. For safety, these shelves should be mounted in their supportive parentheses to prevent or fall or fall if they are thrown.