How do I put brick tiles on concrete?
When installing a brick terrace, it is usually best to remove any structure that already exists in the place. However, if you have a flat concrete slab that is still in perfect condition, you can be tempted to leave it in place. Although it can sometimes prevent you from achieving the best results, it is sometimes possible to place brick tiles on concrete. The procedure will usually include laying sand or fine gravel on concrete and then laying the tiles through its upper part. If the break -up of an existing board and starting from zero is not a possibility, the first thing you can do is to find out whether the board is at the level or not. If the board is perfectly at the level, the water can connect to or under the tiles, while if it is inclined to your home, you may have problems with internal floods. How much problem it will generally depend on how much rain you get.
After determining whether your board is in favor of, the next step is pThe laying of brick tiles on concrete usually lay a layer of fine gravel or sand. Depending on how much vertical space you need to work, you can use a layer of everyone to support better drainage. If you need to change the slope of the board, you can simply place more sand or gravel at the end that must be higher. After putting the brick tiles on concrete, you can brush the sand on them to fill the cracks. This can help them prevent them from moving when they are brows.
If you live in a very dry environment, you can simply decide to put brick tiles on the concrete and a brush on them. This is because drainage will not be a problem. However, you still have to prevent movements when they are walking,
The best drainage is usually achieved by removal and starting from zero, but the correct use of sand or gravel can result in a surface with sufficient drainage. If there is problems with water and the sand is washed away or the tiles move, you will be mSimply pick up and repeat the procedure. This maintenance can be less work than breaking the board - and leaving the board on the spot can allow you to easily remove the tiles if you want a change later.