How do I create a home hydroponic system?

There are different methods for making a domestic hydroponic system. They range from very simple hand -watered tank systems to more complex grids with waterworks or vertical walls made of polyvinyl chloride (PVC) tubing. Between these varieties, the principles of hydroponics remain the same: plants loving water are suspended in an inert substrate, such as gravel, pearlite, mineral wool, vermiculite or coconut, with roots submerged in the growth of trays or fed wicks in a mineral scissor. The process can generate higher nutrient -specific revenues; It eliminates soil, reduces irrigation, attracts fewer pests and can produce internal or outdoors throughout the year. You could decide to put the growers on a pack of float foam in the fish reservoir tank or create an individual bucket or buckets, each equipped with a water pump and a aquarium heater. You can even build a water racking system PVC tubes cut holes to supportIf individual growers or cups. The general idea is to suspend your grower in a support ship and allow water to penetrate the doolter through openings that still keep in your privileged medium. You can run the water by hand or automatic pump, make sure to fill with the sedatel with oxygen bubbles and keep the flow of water against evaporation or stagnation.

After examining various available techniques and selection most suitable for your space and energy requirements, it is time to get building. For example, consider a method of hydroponic horticulture that combines nutrients and deep water techniques. The nutrient film technique (NFT) continuously feeds the water through the system to create a lot of plants. The deep water technique (DWC) keeps the water level high to immerse the roots continuously in the system. This domestic hydroponic system can be constructed using two 10 feet (about 3 m) TrUbic PVC connected by two elbow joints and limited at open ends.

using the saw hole, drill holes about 4 inches (about 10 cm) to 6 inches (about 15 cm) along the top of the tubes of each leg (about 30 cm). At the end of the system, insert a small aquarium pump about 60 gallons per hour (GPH) or 227 liters per hour (LPH); Start its hose and over the second PVC tube. The water should circulate throughout the system and ensure uniform oxygen propagation for plants. Add several air stones to help you aerate. The aquarium heater helps to regulate the temperature.

Add flower pots or drill holes around the lower thirds of large plastic cups and fill the tube with a nut-water mixture. Add the plant and substrate to the cups and immerse yourself until the bottom of the cup is under water. Be sure to follow your home hydroponic system in terms of leaks or other changes. Add to the basic design outlined here and create more lines and pipe configurations. Grow Lights addsOvi even more control over growth conditions.

plants that are well in hydroponic growing rooms include typical varieties of salad: lettuce, tomatoes, spring onions, radishes and green vegetables. Herbs are also popular. The size of the plant will depend on the space allowed for their roots; As a result, larger plants are less suitable for hydroponic gardening. Be sure to organize and spread your home hydroponic system that would allow the plants to receive enough light, and soon harvest without digging weeds.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?