How can I paint the laminate plate?

Refining laminate boards can provide your kitchen or bathroom with an updated, fresh view of the fraction of the cost of replacement. If you want to paint the laminate plate, you must first clean the surface of the laminate and tape from the walls and cabinets. Then thoroughly ensure the board to remove the glossy surface, wipe it down and apply a primer designed for neat surfaces such as laminate. Once the Primer is dry, you can paint the laminate plate in the way of your choice and then seal it with polyurethane or acrylic sealant.

The first step to painting the laminate plate is to clean and prepare the area for your project. If your counters are relatively clean, simply pass them with a cloth soaked in a mixture of liquid soap and warm water to remove any dirt or dirt, while fixing it with a clean cloth. For strongly compacted counters, a more abrasive solution of kitchen can be required. Once everything is and dry, tapes from the edges of the counter,Both near the wall and in cabinets and the area around the sink, if it is usable, with a painting tape. This will help prevent bleeding or spraying into areas other than your counters, giving you a clean and polished surface.

One of the primary problems that occurs when painting the laminate plate is the color that cannot be on the surface, which is caused by a lack of grinding. The laminate generally has a high glossy surface, which is almost impossible for the color to stick to the boards, no matter what type of primer, the color or sealant you use. For small circular movements of the letter, the entire surface of the plate, including any edges, with fine to medium sandpaper. Once the surface of the board is sufficiently roughened, wipe the counters with a clean and damp cloth to remove any dust or use the attachment on your vacuum.

Apply a primer designed for high -gloss surfaces on laminate boards with mediumImagine roller for larger areas and smaller brush to get into smaller areas or for detailed work. Allow the first coat to dry according to the manufacturer's instructions and then apply the second coat. This will give you a good base for color color.

For the real part of the painting of your project, you can choose several different methods. In the desired color, you can simply paint your primary boards with two to three layers of color or use different methods to achieve different results. If you prefer a stone look, use a sponge and two similar colors to create a stained effect on the laminate plate. You can also use the painting tape to create lines or patterns on the shelves and then carefully paint between the pieces of tape to create a unique look. No matter what method you choose when painting the laminate plate, make sure that you can dry the color for several hours between the layers and allow it to dry for at least 24 hours before sealing.

the last step toPainting the laminate plate is sealing and allowing the cure of the sealant. Apply two to three layers of high -gloss putty according to the manufacturer's instructions. It may take up to a month to cure the sealant completely, so be fine with the newly painted board to prevent damage.