How can I spot concrete?
The decision to color the concrete is a bit like deciding to dress in a dark room. You reach out to the pitch and make a choice, but it's someone guessed if your clothing coincides or clashes. You will be dressed, it is certainty, but your appearance will remain a mystery until you reach daylight.
If you start the public, an alternative is dressed. A similar analogy applies if you wish to spot concrete. If you are not a whitish gray, stained concrete will look better than bare concrete. It is also a DO-IT-YOURSELF project, which will eventually cost less than $ 1 USD (USD) per square foot (0.092 square meters). Plus it's easy. Both have their advantages and disadvantages, depending on the final appearance you want most. Acid spots work by reacting with free lime found in concrete and resulting in the final product that has different shades and tones. It should be noted that acid -based spots will not usually work on concrete that is knownts for more than ten years or more old. Before the concrete reaches this age, most of its free lime content disappeared.
acrylic spots contain pigments, similar to color or dye and work into concrete. Acrylic will always produce a more consistent color than acids. Acrylic also works well for dyeing old concrete, because the surface is more porous. The greater the chance, the better the pigment will penetrate and perform your work.
The application method needed to color the concrete is very simple. Using a manual sprayer, bother concrete either acrylic or acidic stain. When the surface is completely covered, smooth it with a broom. Then spray another coating. Let the stain sit in place for five or six hours and then wash it.
The washing procedure is also simple. Use regular mop and bucket and clean any gunk or color remnants. Then put on the rubber handMore and dry the floor with light -colored rags or towels. When the stain stops keeping rags or towels, you are finished cleaning.
Do not touch the surface for several days and allow the stain to dry completely. The last step is to use the seal. Any kind of acrylic sealant with wax coat is fine and can be applied using a mop or Squeegee.
There is one warning word for those who decide to cover concrete. There is never a certainty that the final appearance can be. Pour the same sour or acrylic stain on ten different plates or floors and have ten different results. On the other hand, at least your concrete is no longer naked.