How can I use Borax for Fleas?

Borax can be most effectively used for fleas if you have a carpet in your home, but it can also be useful for homes without a carpet. If you have a carpet, you should sprinkle a small amount of borax in all areas of the carpet and focus on areas where fleas seem to be the most concentrated. Use a broom and brush the borax deep into the carpet fibers. Let Borax sit on the carpet for at least two days before sucking it. You may need to use Borax for Fleas several times a week for a few months before your fleas are completely gone.

If your home does not have a carpet, you can still use Borax for fleas. You should sprinkle borax across the floor in the same way you would use if you had a carpet, but you won't have to work with Borax with a broom. The only drawback is that the white powder will cover your floors, which could cause you to spend time in the rooms of you. For this reason, it may be a good idea to make rooms after beingDenom after a second than to behave with Borax at once.

Whether you use Borax for fleas on carpet or hard floors, you will have to be somewhat careful about excessive humidity. Borax absorbs moisture, and this absorption could make cleaning of the fabric, especially if you have a carpet. If you live in a high level of humidity, you may want to either use Borax on your floors, or vacuum borax within 12 to 24 hours to let it sit on your floors for two days. The longer the Borax on your floors, the more likely it is to absorb excess humidity.

If you decide to use borax for fleas, you should be very careful to plant a vacuum cleaning bag outside after vacuuming Borax up. It is likely that you will vacuum thousands of fleas, Both Dead and Alive when you vacuum Borax. Fleas that are alive can get out of vacuumcleaners and back to your house. It may be a good idea to take the bag outside as soon as you end up vacuuming and leave it there so you don't have to worry about the flea settlement.