What are gas stools?
The gas stool is a stool or chair that includes a height -operated device. This kind of chair consists of a gas cylinder, an inner piston and a control lever that controls a bypass valve. The drive allows the user to raise or lower the seat by controlling the amount of gas under the piston. The gas stools are usually designed for the office, but can also be located in the form of a bar or countermeasure. Stools for office gases are usually equipped with wheels for easy movement around the table. One of the fastest and most comfortable methods of adjusting the seat height is the gas mechanism. This device allows you to reduce or lift a stool or chair over the entire setting range by means of a simple lever movement. The mechanisms of setting the height on the tables are typical of the base inside the base and consists of a closed cylinder filled with a gas equipped with a piston and a bypass valve. The piston is held near the top of the cylinder by the pressure of the gas below it and is attached to the rod thatSupports the stool seat.
This arrangement means that the weight of a stool passenger is effectively born by gas pressure under the piston. The mechanisms on the LIFT gas stool are equipped with a control lever that affects the bypass valve. This valve allows gas from the cylinder to switch to a separate tank or to the cylinder above the piston. If the user wants to cut the stool, the lever is depressing while still sitting. This allows the gas to leave the cylinder, effectively reducing the pressure below the piston and allows the seat descent.
As soon as the seat is at the desired height, the lever is released and drainage of the gas stops. The seat will now stay in this position until it is re -modified. Increasing the stool is subject to a similar process with the addition of a small design guide. To increase the stool, the user gets out of the chair and lifts the lever to reopen the bypass valve. Since there is no more weight on the piston, there is gas pressure below itLower than the pressure above it or in the tank, causing it to flow back to the bottom of the cylinder and the seat lifting.
stools
GAS-LIFT are available in a number of designs that include low or high back and arm models. Gas lift mechanisms are generally found on chairs of secretaries, writers and executive offices, although they can also be used on a bar or a counterattack. Office stools for gas are usually equipped with a set of wheels for easy movement.