What are the door stops?

stops of the pins to the hinge are used instead of stops of spring doors when missing motherboards, or when decorative motherboards make them a bad choice. They are designed to slip over the lower pin of the door, with one foot that points towards the door and the other towards the wall. They prevent doors-or door button-sliding the wall when the door is opened. Turn until the base happens.Ave two rubber spikes "leg". One leg is curved back on the door itself to stop the door to turn freely on the pin, while the other leg is stretched by the support barrel, so it is adjustable in length. It points in the opposite direction to the wall so that when the door opens, this leg eventually contacts the wall and prevents the door from further.

Although traditional spring door stops are visible on the motherboards, they are so low and are so common that most people around themyou directly. The diaper pins are somewhat more visible because they are mounted on the door itself and sit a little higher than the traditional door stop. For this reason, they are available in many goals and designs to emphasize any decoration or vice versa to be as inconspicuous as possible. They can be found in antique finishes of gold, bronze or nickel or polished surfaces of brass, chrome or satin nickel. There are also door stops for industrial use.