What are the mainland?

navigation tiles, as the name suggests, are tiles that are set on the pedestals to maintain the gap between the tiles and the countries below. Such raised tiles allow to compensate for uneven surfaces and also for free air movement and easy water drainage. These types of tiles are available in concrete, rubber and other materials and are commonly installed on roofs, terraces, verands, balconies, squares, promenades and other pedestrian areas. Leakage water can cause damage to the surface related to the moisture on which the tiles are affected, while frost and heat can cause contractions and expansion in the materials of tiles, which can eventually lead to their shocks and relaxation. Laying of mainland tiles can largely contain these problems. By allowing the passage of water and air under the tiles it is possible to avoid damage to the Caused excess water accumulation or freezing or heated air, which is trapped under it. This naturally saves the cost of repair and replacement whoOtherwise, they would be necessary to prevent wholesale structural deterioration. There is no need for main construction if several finishers are damaged. If necessary, the tiles can also be easily removed. Maintenance and cleaning of the pedestal tiles is easily performed using a conventional vacuuming device.

The disadvantages of the mainland are relatively small. There may be some problems that the blocks of the finishers are due to the increase in wind, but it is an easily solved problem. Another problem is the weight of the blocking tiles. It is important to consider whether the substrate is structurally healthy and if it is able to support the weight of the finishers; Failure to take into account this relevant factor could lead to structural damage later.

Before laying the mainland, the substrate is first treated with a waterproof application and then the number of required tiles and pedestals is calculated. The number of pedestals is generally equal to the number of fireAdditional tiles, but in irregularly shaped areas, more pedestals may be needed. The stem is modified to the specified height and then the tiles are carefully set. It is important to ensure that all raised units for tiles are safe and flush each other and clearly indicate the mainland units above the drain openings to later facilitate drainage inspections.