What are the pulling door of the screen?

Screen Drive door is the screen door covered with rolling blinds that open vertically or horizontally. Most blinds are covered with a durable, lightweight material for protection when not used. Some retracting screens are connected to an aluminum tube as well as a voltage or clutch system. These allow the screen to safely pull without too fast. In addition, the speed reduction mechanisms can be purchased separately, which protects their fingers when opening and closing the pulling door of the screen and also avoiding noise.

Screen Drive doors are not designed to ensure security or barriers of entry for humans or pets. The advantage of this screen door is that the blinds protect doors and are safe and easy to use. The screen is out of sight, safe and safe when they are not used how blinds grow. Drive doors of the screen are adjustable for different heights and speed and voltage involved in rOlling Up the Grow Up the Blinds are also adjustable.

Drive screens can be used regardless of whether the handle is on the right or left side and the screens come in different colors and styles. The pulling screen systems are suitable for almost any types of doors such as standard front or rear doors, doors that swing either in or out, double French doors and sliding doors on the terrace. If you want to use the pulling door of the screen, use the leg and push down on the bottom bar. The retreat screen opens. When the door is out of season, the cards on the mounting clips can be pressed to remove the screen.

For installation of the pulling door of the screen, fewer screws are required than the standard screen door. About four wooden screws are usually used to install in the door frame. Drive screens can be mounted inside or outside bricks. Bottom stopAnd assemble Should screens with a threshold that may require another piece of wood to support track.

Careful measurements should be made from the threshold to the brick bar at the top of the door and from the side to the side for measurement. The numbers should then be used to reduce aluminum parts if necessary. Screen retracting systems are supplied with an end closure that puts in the screen cassette. The handles are then mounted on the tensile bar and mounting holders are connected to the cartridge side. Finally, two screws can be used to mount the cassette to press bricks.