What are the best methods for building chimneys?
The chimney building is not extremely difficult, but even minor mistakes can cause problems in the house. Find out the construction code of the local area before starting the project. Choose a brick or stone that can withstand high temperatures; A smoke insert and a ceramic fiber paper are also available to increase the heat resistance. Once the insert is connected to the chimney, cover it with bricks and mortar before laying the chimney cap on the last row of bricks. Once the mortar is dry, clean the excess with a hose and brush. Different regions have their own specific regulations in terms of building chimneys, so it is important to ensure that the project meets these rules. It is quite possible for the chimney to be built to perfection only to come by the building inspector and order it to be removed for non -compliance. Call the local building department and find out what rules apply when toping to the chimney building in this area.
There are many materials that can be used to create chimneys; Stone and brick are the most common andMost reliable. When building a chimney, it is important to use only the best materials. The finished project will have to be able to withstand temperatures of up to 112 ° Fahrenheit (600 ° Celsius).
The materials to be used must be decided before one brick is laid. The chimneys made of fire bricks and mortars are very popular and survive for many years if they are built correctly. There is also the possibility of installing ceramic or steel smoke inserts. If you choose a liner, make sure the chimney has been properly measured and recorded the specification of the insert.
When building a chimney, there must be a certain amount of space between the smoke insert and the masonry. This is because the insert needs enough space to extend the contract without restrictions. Some building regulations require chimneys to include seismic strengthening. This means that ceramic fiber paper must be added to the chimney. Ceramic fibero Withdraw more than 2,012 ° Fahrenheit (1100 degrees Celsius).
Once the stocks are purchased and read the regulations, the chimney building can start. Use the mortar to attach the insert to the chimney and allow 24 hours to dry. Place the mortar on the bottom 2 feet (61 cm) inserts. Cover the brick insert and place the mortar between the bricks using a spatula. Use a damp cloth to ensure that the mortar is smooth.
Continue building until the bricks are 1 foot (30 cm) from the top of the insert. A cap of chimneys should then be laid at the top of the final brick series. The purpose of the cap is to ensure that the water does not drop from the chimney when it rains.
Let the next day go while the mortar dries. To attach Chi, use roof flicker to the roof. Do not operate the fireplace two days after completion of the project. Use the hose to rinse the chimney before scratching the excess mortar using a brush.