What are the best methods for plasterboard recording?

Tapeng plasterboard is one of the final touches used to complete the installation of plasterboard in the room. The main function of the tape is to cover the gaps and joints that exist in the corners and at any point along the wall, where parts of the plasterboard panels are connected. Although there are two types of tape that can be used in the process of installation and modification of plasterboard, the method for using the tape is very similar.

Before connecting to any plasterboard recording, it is important to ensure that the plasterboard hangs is done correctly. In principle, this means ensuring that the plasterboard leaves are attached to the walls with the factory edges of each questioning. This is because the edge of the factory is a little narrower than the body of the leaves, which will be very important if the plasterboard tape is to be used correctly.

with the leaves on the spot is the next step to find out what type of plasterboard tape will be used for the role. Experts tend to prefer paper through glass fiber. Homeowners who themselves manipulate the taskHowever, plasterboard can consider the type of glass fibers easier to work.

If you use the type of paper, the first task is to assemble the necessary plasterboard supplies. You will need scissors to cut the tape to the right length, sealant knives and a mixture of plasterboard, which is commonly known as mud . Maintaining a small towel can also be a good idea.

You want to start, use a sealant knife to distribute a thin layer of mud in the area around the seam. Use the knife to smooth the mud so that it fills the slight indentation created by combining the two factory edges of the panels. Once the mud is in place, cut the part of the tape over the seam and press the tape firmly using the knife blade. As the last touch to record plasterboard, spread the thin layer of mud over the tape and the feather seam until the area is smooth. Leave mud and tape in place overnight. At that moment, the wall will be ready for color.

If the completion of the plasterboard is completed using a glass fiber tape, the same basic process can be used. Since the glass fiber plasterboard tape has adhesive back, it may be easier to introduce amateurs. As with the paper tape, use the knife blade to make sure that the tape is smooth, then apply a thin layer of mud over the tape and make sure the mud is tightened. If it is done correctly, the result is a smooth surface that makes it impossible to find out where the two plasterboard panels meet.

The same drywall recording technique can also be used for corners. One difference is that it is a good idea to fold the tape vertically, so it is much easier to press the body of the tape directly into the corner seam. This simple trick to the corner of plasterboard will save a lot of time and frustration.

Before painting plasterboard, use a knife or a light grain of sanding paper to take care of any small bumps in the dried mud that may be present. PEsse the hand to cross the surface where the seam was covered, and make sure it is smooth to the touch. Wipe the remaining dust from the wall and then apply the pain.

Whether you are a supplier of plasterboard or the owner of a house that gives the room, recording of plasterboard is one of the simplest tasks associated with the process. With a little patience and attention to the detail, the simple access of the tape and the float to complete the plasterboard will lead to a great -looking wall that seems to be completely trouble -free.