What are the best tips for Stuku?
Basic stucco tips include choosing the best stucco for work, understanding how much to use and when, and make sure you are clean and even surface before starting. Given these tips, the use of stucco is something that most homeowners can do themselves. Homeowners can get this skill relatively fast and usually not too difficult to make work to look professionally for the first time.
And most importantly, before using stucco is the choice of stucco methods in the main aspect. There are two main variants, spreading and spraying hands. Although one application is good for application of stucco in different situations, most apply outdoor stucco by means of a hand spreading method. Most spray stucco is used inside, but there is no hard rule. Spraying causes work to go faster, but the hand application allows for more control and more even coating.
After selecting a method for use of stucco, the next step Makujistějeje that the working area is clean. ItIt will include not only removal of any dirt or residues from the surface, but also peeling of any color and wallpaper from the area. If this does not take place in advance, the stucco could begin to tear off prematurely and fall prematurely.
For manual application, just place a little on Trowel at once. This allows the user to spread evenly without having to worry about too much material. Also, keep the stucco uniform pressure to make sure the coverage is uniform.
The first step for using a stucco spray is to ensure that it is thoroughly mixed. The stucco is supplied in powder form and must be mixed with water until all lumps were removed. As soon as it is sprayed, the sprayer must constantly move back and forth throughout the area to make the coating as much as possible.
Depending on the materials that are used, some preparatory work will also be required. When using a STWood Uku must insert the workers to cover the wood for wood to keep the stucco strapped. If it is applied to brick or concrete, the worker must first clean the concrete bond to the surface.
Do not forget to use scratches before applying the final layer. Wait an hour and then fold through the coating to the eighth inches (3.175 mm). Wait at least 48 hours before applying the final coating and make sure that the scratches are periodic.