What are the best tips for the direction of brick?
The purpose of brick is to replace free mortar that can start to fall from the wall of the house. A ladder or scaffolding can be used and the work should be completed from top to bottom. Tools such as a piece hammer are ideal for brick routing. Only a small amount of mortar must be removed before adding a new mix. Brick seams can be hit by a piece of pipe or something similar to a professional surface. The free mortar house between its bricks can be damaged by the humid air that penetrates the bricks. The exterior structure of the house is beaten by the weather for a long time, leading to the release of the mortar. Although brick routing may take a considerable amount of time, only a small number of tools are required.
If it is needed to work with extensive work, the ladder itself may not be enough and it would be ideal to use the scaffolding tower if possible. Since the work involves working from a height of electric tools, it would be best to have a stable base on KTEré stands and have two free hands. If the ladder is to be used, try to find someone who holds the ladder or make sure that the ladder base is dug into the ground or is supported by a heavy object. It is best to start bricks from the top of the wall and work from left to right or vice versa. Starting from above, it ensures that the falling mortar can be cleaned from the wall on the way down and it has not hurt any bricks that have already been aimed.
The best tools that can be used for brick direction from the ladder are pads and thoracic hammer. Those who work from the scaffolding tower can use a hand grinder, preferably with a diamond disk, because it goes fast and purely by mortar. It should be noted that Brick Pointing must not be attempted without safety equipment such as glasses and mask of the entire face if possible.
During the task, around 0.75 inches (20 mm) can be removed. Those who use a grinder must take care of brick damage with this powerful tool. The seams can be a clockMena water made of spray bottles, but are directed with a new mortar.
Finger spoons can be used to push the mortar bowl into the seam. It is not a good idea to mix a lot of mortar at a time because it solidifies before it can be used. As soon as the mortar starts to plant, hit the seam with the Trowel, a piece of pipe or other small, hard object to create a high quality surface.