What are the best tips to create a zip line?
zip line can usually be built almost anywhere. One of the simplest ways to create a zipper line is the use of a zippered set, but the creation of a zip line can also be achieved by obtaining all materials separately. Before the zipper line is created, it should be assured that there are no objects that the user could hit when traveling along the line. ZIP line angle will also determine how quickly users travel. Although zip lines can be a lot of fun, safety should be the main aspect when building a zipper line. They are usually set between two high objects such as trees. One popular place for the position of a zip line is from the house of the tree to the ground. If the trees are not available, two poles from heavy metals can be used instead, but must be placed firmly in the ground. These can be purchased from some sports goods stores, but they can be announced on the Internet. They usually contain all the equipment needed to create a zip line. Cables, handles and brakes are usually includedThese sets and some even come with the seats.
Creating a zipper line without a set is also option. This requires some thick steel cable and pulley or zipper trolley. For safety reasons, however, it is very important that the materials are strong enough to maintain the weight of a heavy adult. Usually it is recommended to cable aircraft because it can maintain great weight.
To ensure that users travel around the zipper line, one end of the cable must be anchored slightly higher than the other end. However, building a zipper line with a steep slope can cause the user to travel too quickly on the line. This can be dangerous for young or inexperienced users and can lead to serious injuries.
If you want to start building a zip line, the distance between the two line points should be measured first. Several other legs of the cable should also be purchased. This additional length will compensate the cable attachedto anchor points.
Long eye bolts made of galvanized steel can be used to anchor the stainless steel cable for each tree. The cable should be elongated by the eye screw at the starting point and should be made and provided with a loop with a stainless steel cable terminal. After the trolley with a pulley or ziplina is threaded onto the cable, the other end can be driven through the eye bolt at the zipper stop point. The cable tighteners can then be used and a cable clamp can be used to ensure the cable loop for the second tree.
The handle can be connected to the bottom of the pulley to make it easier to hang. The rope loop can create a simple zipper description, but large wood dowels can also create good zippers. The rope should first be safely attached to one side of the dowel and drove through the metal ring on the pulleys before it was connected to the other end of the dowel. The longer part of the rope can also be used to connect the seat to the zip line.
Safety should always be the first PRobblem when creating a zip line. For example, a zipper line should never be built too far from the ground, as this can result in very serious injuries in the event of a fall. Any obstacles, such as tree branches, should also be cleaned from the zip line to ensure that users are not affected. All materials and devices should also be checked in terms of free anchor points and damage every time the zip line is used. Helmes are also recommended.