What are the best tips for removal of the rogue?

It belongs to the brass family of musical instruments and usually consists of four main parts - inner slip, outer slip, tuning of the glass and bell. Every time the trombone is played, the dirt accumulates at the top of these parts and inside these parts, so they must be cleaned regularly to move smoothly and maintain the instrument gameplay. It is important to treat each piece carefully and use the appropriate cleaning fluid when cleaning the truncation. In addition, a good substance should be used and the tool should be easy to clean daily and bath at least once a month. It is sometimes necessary to disassemble the trombone and clean each of the pieces individually when cleaning the river. To prevent the piece from deepening or distorting, every piece that is not in the process of cleaning the trombone or on a hard straight surface that is above ground level should be included. This protects parts of the rogue from entering, sitting or falling.

When cleaning the river, each part should be treated with great care. It should not take place too tight, as this may cause the metal to deform. If the trombone is cleaned on or above the hard surface, the location of a large, soft towel on the surface should prevent thrombone from scratching and providing suspension if the trombon slipped out of the cleaner.

Mild, liquid washing plots are suitable for cleaning. Thrombon players usually mix one or two drops of liquid detergent with lukewarm water when cleaning the rogue to remove dirt and oil from the inner and outer surface of the tool. Hot water should not be used because it could remove the protective varnish.

They usually have shiny and smooth surfaces from throttle, it is important to clean them with soft substances. Those of micro -rule, such as cleaners with glasses and those with a high number of thread, clean the trombone without scratching the surfaces. Rough substances and towels should be avoided.

In addition to cleaning a cloth with a cloth is also inYested a cleaning snake and a brush. The cleaning snake consists of a long, flexible tube with a washing machine at each end and a mouthpiece brush resembles a typical cleaning brush. The cleaning snake is used during the spa to remove the dirt inside the rogue. It is much more efficient in removing dirt and dirt than water and detergent. The mouthpiece brush is used to regularly clean the instrument mouthpiece, to ensure that it plays well and ensures proper hygiene for players.

In order to keep the trombone in good condition of playing, it should be cleaned daily or at least after each game. Daily cleaning takes only a few minutes and can be done using a brush and mouthpiece. Daily cleaning removes dirt and dirt from contact - or external - surfaces, including mouthpiece. Daily cleaning is done by pushing and pulling the base of the mouthpiece in and out of the mouthpiece and then shaking the trombone.

Baths are used to clean the internal and external surfaces of the rogue and should be performed at least once a month. Previously,It must be disassembled before it is a trombone bath. Each piece is then cleaned with lukewarm water and detergent and a snake is used to remove dirt from the tube. Giving a trombone bath in a bath or shower tends to be easier than bathing in a sink. After bathing, the tuning and hand slides should be oiled with a special trombone lubricant.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?