What are the best tips for the tiles of the cleaning block?

paved surfaces generally see a lot of traffic and if they are not regularly maintained, they can collect a lot of impurities and residues. Lack of proper care can also lead to unrealistic growth of moss and weeds in joints between tiles. Therefore, the cleaning block pavement from time to time is necessary for the area to be clean and look good. If vegetation grows, it should be removed, and this can be done manually or using a weed remover; It is advisable to go to the organic and non -toxic weed remover, as this is a minor health and environmental risk. It may be necessary to let the weed remover, if used, to gain efficiency. A few soft, rigid bristle brushs can be enough to clean BL if the area is well maintained regularly. In this case, if the pavement is only slightly dirty, it can only be scrubbed with a brush and soapy water and then washed out with clean water.

For cleaning of block tiles, a formulated driveway cleaner or cleaner on the terrace can also be used. These should be used according to the container instructions. It is generally mixed with water and the solution is a mistake or brushed above the surface of the paving. It is then left there for several hours or all day and is washed with water.

It may be necessary to resort to the pressure of pressure if the area does not tend to be very long and has become particularly dirty. Cleaning blocks in this way is time and energy saving, but knowing how to clean the block tiles in the right way is important because the use of too much pressure can very well disrupt the tiles. The washing is kept at an angle and near the block surfaces, whether cleaning on the terrace, cleaning the driveway or cleaning asphalt.

Pressure washing is likely to remove the upper part of the sand between the paving blocks, and this will have to be replaced. It is good to allow this area to dry thoroughly for at least one day and then fill the drought gapsScripture in Pec. The sealing solution should then be used to seal the joints. This area will now look almost as good as new.