What are the best tips for creating solar water?

Solar water garden is a function aimed at improving the appearance of the garden. The built water device can be used either for plants or fish breeding. The solar garden elements are plus when lowering electricity consumption and increasing gas protection. The Sun Water Garden uses photovoltaic cells that have twelve to twenty -four voltages that power the motor pump, rather than powering the connection from the main premises, which could be a risk.

The first tip when creating solar water is to decide on the size. The size of the water garden depends on the available area and function that is required for the garden. After deciding on the size, analyze the location. The ideal placement for the solar fountain is in place that is not near trees or shaded areas to prevent water waste, as well as outside service cable infrastructures such as power cables and water layout. The function of the solar force should be sown to have a sunlight exposure for at least fiveDIN every day.

Another important tip in creating solar water is to obtain the right photovoltaic cells. The size of the photovoltaic cell panel is determined by the power consumption of the required solar pump, the output specifications of which are predetermined by the size of the water garden. The size of the solar panel is also dictated by the type of solar water garden; running or stagnant water. If the water is constantly flowing, more energy is needed to pump it in or out, while the stagnant water horticulture will require less energy because the pumping of water is periodic.

If water must be done all night, a backup battery must be obtained. The battery should be able to accommodate generated energy and needed, panel of photovoltaic cells and solar pump. Avoid combating the battery due to excess or overload must also be installed the charging controller. SolarThe panel and battery must be close to each other, but at a considerable distance from the water. This is to reduce the loss of the charge due to the distance, as the current weakens or is unnecessary due to resistance over long distances.

Finally, the safety of people who operate the solar water garden and organisms in it must be ensured. The solar pump could be immersed in water or placed in a dry place. In both cases, the pump and its cabling must be insulated to prevent energy leaks that could be dangerous to the solar pump due to its short circuit and shocking people and animals in it. If you want to do this, use insulating materials to discourage energy leaks from receiving into contact with water.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?