What are the best tips for installing optical fiber stars?
Optical stars fibers make quite a contrast to the dark ceiling in the nursery, office or living room. Decorating with fiber optics requires a little work over the room or the installation of the ceiling with a fall if access is limited. Planning a light pattern before doing any work is highly recommended. For those who have minimal experience, the sets are available for home assembly. The best star -field simulations are somewhat accidental if the decorator does not concern specific shapes such as fireworks or galaxies. The dark ceiling shows a better contrast and hides any installation errors. The brightness of optical fiber stars will vary depending on how deeply they are built into the ceiling. The filaments will look better if it is a little protruding at the end to prevent the effect of Halo. Optical fiber cable or fibers transmit light from the illuminator to the end fittings that go to the drilled holes. Illuminator will have to be placed in the ceiling above the room and connected to the electricsockets. It should be in the accessible area so that the bulb can change regularly. If there is no access to the above area, a suspended or dropped ceiling will have to be installed.
In a fixed ceiling with access from above, drilling holes from bottom to top is the best way to avoid splitting, which occurs at the output point of drilling. Cables or fibers fibers or fibers can then be stretched down the holes and fixed in place. End fittings in different styles allow you to go through the light while blocking the hole. When working in an unfinished attic or ceiling areas, they maintain protective clothing and masks of the minimum insulation exposure.
Installation of the fiber-optic Stars takes a long time. At least two people should be present, one above and the other below. They can communicate through the ceiling if possible or two -way radio or speaker. Another person is useful to make a drilling VLIt plunged and alerted the drill when it is close to the electrical connection. Light lights from below will help find holes.
Once the optical stars are installed, the effect can be enjoyed. Filaments create ambient light that can affect the contrast in screens and design screens and high -resolution projectors. The effect is negligible, but it may be a consideration in the media room or home cinema.