What are the best tips for laying concrete tiles?
Laying concrete tiles can be a successful DO-IT-YOURSELF project after several of these best tips. Start by laying tiles in the intended design to get an idea of what they really look like. Below the sand base, spread a layer of small gravel for better drainage and keep the surface of the association near the ground level for easier mowing. The tiles can be laid very close to each other, otherwise the space for gravel, lumber or wood chips can be left. Concrete tiles can be extended wider to cross the natural surroundings, stacked on steps or curved for curves.
Before laying concrete tiles, it is best to arrange them in the desired pattern in the workplace. A walk through the design from several directions to look at it well. Any changes in the pattern can be easily done without disturbing the finished work. Note any areas in which you will need to cut the tiles and get the necessary tools before work. This preliminaryThe step will be the need for other finishers.
steps should be carried out for future drainage, weed control and surface smoothness when laying concrete tiles. A layer of pea or crushed gravel should be placed under the sand base to support good drainage. A certain type of edge should be used in grass areas to prevent future intervention. The edges can also be installed to prevent the sand base from the rain showers. After laying concrete tiles, sweep any remaining sand in the joints to make the surface smooth and level.
Laying concrete tiles at Earth's level will allow lawn mowers to pass them without causing the blade or sidewalk damage. Placing the tiles below the ground level can cause water to get during rainfall. This can also allow leaves, dirt and other to the sidewalkThe remains. In forested areas, materials such as gravel, chips and crusaders can be used to fill the gaps between the tiles for a more natural look. It is also possible to place strips of treated timber between concrete tiles.
The unique appearance can be achieved by laying concrete tiles gradually from the center. This allows the terrace pavement to gradually cross the surrounding lawn. This formula can be followed until the tile becomes the reflector stones on the driveway or extension. Concrete tiles can also be stacked on top of each other to create steps on slopes and terraces. If you want to avoid cutting the tiles for curves, combine slightly and create a rounded look of the handle.