What are the best tips for laying finishers?
When laying finishers, it is important to approach each project step carefully and in the right order. Planning, buying sufficient materials and proper preparation of the area for reinforcement are key elements of a successful project. A number of special tools are required to complete the tiles project; These can usually be rented. To indicate the pavement area with a line, you mark chalk and string. This allows you to imagine the project area. Be sure to explain the drainage when selecting the tiles area. The palm area must bend from the building to allow rainwater drainage. Always buy 10% more tiles than the expected need. This is partly responsible for breaking, but also because it may be difficult to find good -to -date from for paving if it is necessary to return for more. Also buy enough road base and bed sand to cover the area.
In order to prepare the area, the primary task is condensed by land,so that the tiles can lie flat. The tiles should be flushing through the lawn and lying across the area. Dug 8-9 inches (20-22 cm) in the tiles to create space for sand and tiles of stones. Use the vibration plate to compact the soil in the paving area thoroughly. Pour up to 6-7 inches (15-17 cm) of the road base and watch the sand layer, spread it so that it is even and flat.
As soon as the area is ready, it is time to start with installation. Start in a corner or fixed object like the wall of the house. As instructions for guiding straight edges. Use chains or chalk lines from the planning phase. The intermediates so that the tiles are close but not too tight together. Instead of walking on the laying bed, they walked across the area in the middle of the tiles to lean.
It will probably be necessary to reduce some edges for edges and smaller spaces. Use a diamond saw for best results. Before cutting, carefully measure each tile.
As soon as the paved is laid, mOhou be compacted. Use a mechanical board compactor with a rubber mat or carpets under the compact to prevent the tiles from damaging. Once the tiles are compacted, spread more dry sand around the paved area. Season the sand into the gaps between the finishes. Let the sand settle.
Some tile varieties will need a sealant coat protection. This helps to prevent stains and prevent weed growth. Remove the next sand around the tiles and then bother them with sealant.