What are the best tips for bathing bathtubs?
The bathing of the bathtub can be a project of the homeowner of the DO-IT-YOURSELF house, but patience and focus will be required to perform nice work. Products available for bathtub painting come with detailed mixing and application instructions. A clean bathtub and working environment is a need to achieve a smooth, uniform and well -connected surface. The process should not be rushing and extreme attention should be paid to follow the instructions provided with the product. Painting the bathtub usually takes more than one day and it is not an easy or fast task.
Bathtub must be absolutely clean before painting and without dirt or foreign substance. The use of cleaning of chemicals and abrasive pillows is recommended to ensure that all dirt is removed. If possible, it is advisable to remove chrome and metal accessories. If the old luminaires cannot be removed, it should be carefully covered with high -quality camouflage tape. The bathroom area should also be clean, without dust, and if at all posso, not used for the duration of the project.
Once the bathtub is clean and dry, the entire surface should be ground manually or using an electric grinder of light. For trimming the surface, to remove the remaining dirt and etch the surface for the purposes of gluing and etching the surface and etching the surface for gluing purposes. This step is very important because the new surface is better connected to the surface that was a spear. The bathtub should be thoroughly cleaned with alcohol to remove all skating gravel.
When painting the bathtub, it is advisable to remove all dust from the surface and work area. For this purpose, a aperture or a clean, soft rag soaked in alcohol will work. If the chips need to be repaired, a suitable epoxy filler should be available at the local hardware store. The instructions should be carefully followed and the patch should be allowed to set for the right time. More cm can be required oats from the filler.
After completing repair, cleaning and drying BThere is another step of Primer. Most bath painting sets will include the right primer for the surface and surface that will be applied. Painting experts can also offer advice on a suitable primer unless the material is included in the set.
After a thorough dry coating, the top layer may be applied. The epoxy color must be mixed according to the instructions and the correct brush or cylinder should be useful. The application method is generally provided on the instructions and must be followed to achieve the best results. Adequate ventilation is suitable because this color may contain strong chemicals. Depending on the change in the color and clarity of the desired surface treatment, several coats of the epoxy finish may be required.
The epoxy product must cure between each coat; As a result, this process can take several days. Because dust and dirt in the air can destroy the goal, special attention should be paid to maintaining the workspace as purely and BE as possiblefor the remains. The bath painting includes a number of procedures that must be done one by one, so each step is important to achieve a professional result.