What are the best tips for paving the stone driveway?

The pavement of the stone driveway is a process that can be completed according to several simple tips. The area that was marked because the driveway must be dug. The width and depth of the hole must hold layers of sand and gravel that will be added as well as trim. Add the mixture with sand and gravel, place the sand on top and install plastic trim around the edge of the driveway. When laying the stone, work from below before you sweep more sand between the gaps in the brick.

After deciding on the material that will be used to pave the stone driveway, prepare a place. This means digging an area to be reinforced. The hole depth depends on the height of the stone used. In general, the hole should be a stone height plus 6 inches (15 cm). This additional depth is required for bedding material.

It is also important to dig a hole of approximately 8 inches (20 cm) behind the edge of the driveway. This additional pavement of the stone driveway must be added. After digging the hole with uSurely that it is flat using a bucket for smoothing the area.

Fill the entire area that has just been dug with a mixture of sand and gravel. This layer should be about 5 inches deep (13 cm) and must be digged to be smooth. Use a vibrator plate to create a company mixture. Be careful not to leave traces in the hole.

Another layer of sand about 1 inch (3 cm) should be placed on the upper part of the sand and gravel mixture. This is a key element of paving of the stone driveway; If this sand is not smooth, the entire driveway will cause uneven. Use a long wood board to make sure that the sand layer is even everywhere.

The latest preparation when paving the stone driveway includes the installation of the edge. Use black plastic trim designed for use with tiles.Keep the installed edges with long nails that can be damaged on the cards.

bricks should always be laid on the bottom of the driveways. Continue to lay the brick below until the whole procedure is completed. Use the vibrator plate to re -maintain compact and even bricks. Place the sand on the bricks and sweeps it between the gaps in the brick. Fill the edge of the soil driveway and use the rake to make it smooth.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?