What are the best tips for clarifying teak?
Teak furniture is known for its strength and durability, as well as the unique ability to become more beautiful as it ages. Nevertheless, the teak can still be damaged under certain conditions, especially when used outdoors and if the surface is worn. There are different methods for clarifying teak, each with its own advantages and disadvantages.
The first step in clarifying teak furniture is to remove the existing surface. In some cases, everything that will be needed will be needed, a simple surface stripper. These products are usually a liquid or a gel and are applied using a clean cloth directly to the wood. Some insulation agents are better than others, so if the wood has more coats from the surface treatment or varnish, it is good to buy the strongest solvent available.
Even the best strip agent on the market fails from time to time. If this happens, it may be necessary to grind the whole piece-and remove the varnish in the process. Grinding becomes even more Necessary if the piece is seriously damaged to more than oneOM place. It is important to whistle slightly to ensure that the teak remains smooth and ready for color or finish.
Refinishing teak correctly requires decision -making on where the piece will be used. The outdoor piece can be left unfinished and natural teak wood gets an attractive silver/gray color. If completion is applied, more than one coat may be needed to ensure that it is not removed due to the sun and the rough weather conditions, and it is necessary to buy a surface specifically for outdoor use. The inner piece can only be completed with a thin clear varnish. Furniture can also be colored before completion in both cases.
Apply the lacquer in layers, allowing the first coat to paint on another. Follow the instructions of all manufacturers to use the paint and make sure you go with grain. It is especially implementedVarious furniture for internal use should always be applied in a well -ventilated area. Outdoor applications, weather permits are recommended.
Some are selected against fully refinement of teak furniture and instead decide to paint a piece. Painting allows full adaptation for color selection and any shablled patterns that can be required. To get the best results, use a spray primer before adding any color. Then use either the paint sprayer to apply the paint or use a soft brush to glide and pay very careful attention to the details. Do not forget to use only the exact amount of color to prevent running and drops that can be visible on the finished product. Allow any varnish or color to dry completely before placing the furniture.