What are the best tips for installing tiles?
Installing tiles can be a simple project for many homeowners. The tile is reasonably cheap and if you can complete the installation of the tiles yourself, it can be a very affordable project of reconstruction of the house. People use tiles on backsplash, floors and walls. If you are interested in installing the tiles yourself, there are several things to keep in mind.
The tile installation works best if there is a surface on which you put the tile, robust and level. For example, if you install the floor of tiles and the floor is not robust, any movement in the floor can cause tile rupture after installation. If there is an area where you plan to install the tile, uneven, you may want to spend some time pulling under layers and replacement. Take the time to put it, the tiles will save you a lot of time and money later.
Many older houses can be absolutely robust but uneven. If it is slight uphill or downhill to podlAhu, you can probably fix it when you put the tile. You can do this with a thicker layer of mortar during the tile installation process. If the difference is more than a quarter of the inch (0.6 centimeters), you will even need to even the floor before laying the tile.
The first step in laying the tile is the use of the substrate. Some people lie directly on the plywood, but get better results using a cement board. This thick board provides a strict support system that prevents them from bending and cracking. Each manufacturer has recommendations for installing cement slabs. You will usually use thin mortar and screws to attach the cement plate to the substrate.
Once the cement board is in place, you are ready to start tiles. Make dry before mixing the mortar. You want to do dry customization, place the tiles over the floor. You make tochcete -i make sure your tiles are centered. Growe in the middle of the room and make the way to the wall.
In this way, the tile layout allows you to have a uniform tile circuit around the edges. Once you have the tiles set for your satisfaction, make a brand on the cement plate where you start laying the tiles. Apply a thin mortar mixture to the cement plate and roughen the texture using the intention. Now you are ready to lay the tile. Press firmly down and make sure that once you put it in place, you do not move the tile.
work on small parts of the floor at the same time. Thin-set Malta is difficult to work with the length that is in the bucket, so do not mix more than you can use in 15 or 20 minutes. If it starts to assemble and work with it, discard the dose and mix the fresh mortar.