What are the best tips to repair your pocket door?
pocket doors can stop working correctly for various reasons. It is necessary to repair the pockets that left the track, have a damaged track or do not turn as it should. If the pocket door left the track, the cylinder might have to be replaced. If the door of the pocket has a trace that suffered from wear, it may be necessary to install a new track if the problem is not just a case of free screws. Pocket doors may have to be removed to determine the problem that does not rotate properly. Several problems may manifest, although none of them generally deal with it. You want to repair the door pockets that left the track, break the seal on the door with a knife. Remove the stopwatch on the JAMB door with a chisel. Place the door pockets in the middle of the door. Remove the cylinder from the top track. Carefully check the rollers to make sure they are not broken; if they are, replace immediately.
You want to repair the door pockets damaged with a track, put your hand in your pocket and check the stability of the track. Can have free screws that Mus Musbe tightened. Replacing the track itself requires the removal of the wall cover. Once the old song is discarded, install a new one.
To fix the door of pockets that are not followed correctly, look at the rollers to make sure they fit into the track. If this is not a problem, all doors will have to be discarded for further check. There is a piece of wood along the door trench. This must be cut slowly and exactly with a knife.
Use either a flat top bar or a sealant knife to take off the door stops. It is important to avoid breaking wood as it can be reused. Close the door again and make sure they completely cover the door as usual.