What are the best ways to remove wallpaper?
There are a number of different ways to remove the wallpaper when erasing the house. The best method usually depends on the type of wallpaper and how long it was glued to the wall. Hot water steam, chemical solvents and dry peeling are a possible means to remove wallpaper.
One way to remove the wallpaper is a cleaning solution called a solvent that softens and releases the adhesive that weighs the paper to the wall. Many people add hot water detergent, which they then apply to the surface. This helps to release the adhesive so that the wallpaper can easily peel off. Alcohol or vinegar friction can also add good solvents when added to one to four ratio to the water. Others prefer the use of liquid fabric softener because it can be sprayed directly to the desired area.
steamboats are also commonly used to remove wallpaper. These appliances are similar to ironing that smoothes wrinkles in clothes. The steamships boil water and release hot steam when it is printed next to the surface. ForI applied to the wall with steam warms the wallpaper and release Ahdesive. To lift the corners of the strips of paper and scratching stuck pieces are sometimes required utility knives or knives for sealants. Some people use gloves to protect hands from burns to work with steamboats to remove wallpaper.
Metal wallpaper or other non -porous paper is often harder to remove. The solvents themselves can be ineffective. In these cases, a scoring tool such as TIGER® paper. After applying the solvent, the shooter is converted through the wallpaper to clip and tear the wallpaper from the wall.
Although the wallpaper has been removed, spots can remain to the wall. In most cases, they can be easily cleaned through a common household method. Kitchen peeling and bucket full of hot water usually do good and do not resize Job. Since the Washing process, among other glue, can often be messy, but usually recommendedTo make the floor and furniture in the room first.
More modern wallpaper is often removed because it does not require any special solvents or steaming. It can simply be peeled at an angle of 45 degrees by pulling a strip of paper backwards. The belt should be immediately, but if some pieces are stuck, hot water and peeling may be required.