What are the different parts of the drum?
The basic five -member drum kit consists of a drum with a drum, bass drum, rack Tom, Tom and cymbal floors. Each drum can be divided into five basic parts. The three of the largest parts of the drum include shell, head and edge. The remaining parts of the drum include tensioning bars and mesh. It is the easiest to recognize from all parts of the drums. It is generally made of wood, acrylic or composite, but in some cases it is made of metal or carbon fiber. The material from which the shell is made can significantly affect the sound and tone of the drum. Each shell has a small hole called a venting hole that allows air leakage when the drum is hit, which in turn improves the resonance of the tool. Usually made of flexible synthetic plastic, the head of the drum is stretched over the cylindrical opening on. Most drums have a head on top and at the bottom of the body. The upper head, sometimes called dough , is the part that the drummer hits while playing the instrument. The lower head is there for resonance and je usually thinner than the upper head.
Metal or wooden rings called rims or the hoops are parts of the drums that hold the heads in place. Snares and Toms have generally metal rings, while bass drums often have wooden rings. Drummers can adjust and tighten the edge using a series of metal bars along the sides of the shell called tensioning rods . On the drum it can be anywhere from five to ten voltages and are usually held on site metal holders called drum lugs . The drums are actually connected to the drum shell and appear in different shapes and sizes.
Some drums also have DNA mounting devices that allow the drums to be attached to the stands and angles to meet the needs of the drummer. Most drummers play their tools using mallet or, as in the case of bongo drums, hands. But drummers don't play bass drums with a stickI or hands. Instead, it strikes the bass drums using foot pedals with attached padded mallet. The foot pedal is usually not connected to the bass drum itself, but is still considered an integral part of the tool.
different types of drums have different specialized parts of the drum. For example, a snare drum has thin wires that runs over the base of the dough head. These wires, which are connected by a special holder and run the lever on the outside of the drum, give Snare a significant sound. As another example, most bass drums do not have tensioning bars. Rather, drummers adjust the voltage with a specialized holder called claw hook, you normally do not see either on the drum or Natoms.