What are the different plasterboard products?
plasterboard is a building material made of gypsum, sand, water and other minerals. These materials are pushed together and sealed between layers of heavy paper to form a thick leaf, which can range from 1/4 inches to 3/4 inches (6.35 to 19 mm). Different types of plasterboard products are used to build walls, ceilings and many other architectural elements in homes and commercial structures.
Most plasterboard products are selected on the basis of budget and application. Thinner leaves of plasterboard are more accessible, but are less resistant and long -term. Stronger leaves or those with added functions tend to endure better, but come with higher cost of advance. In fact, choosing the right plasterboard products can lead to cost savings in the long run to reduce the cost of maintenance, repair or replacement. Traditional plasterboard will work in the almost application and has no added components to increase its cost. Fire plasterboard,Known as "type X", it contains perlite vermiculite that helps slow down the spread of fire and minimize the risk of collapse or failure. Gypsum -resistant plasterboard products, often called green board, are used in humid areas such as cellars, bathrooms or kitchens that help ban mold and mold growth.
For veneer plaster applications, builders can use a gypsum board or Blue Board instead of regular plasterboard. This material has a special coating on its surface to help the plaster smoothly to the board. The sound plasterboard is used to reduce the transfer of noise by walls and ceilings and can contain lead or metal foils to divert sound waves. Gypsum -lined products are used in hospitals and laboratories to protect passengers from X -rays and magnetic imaging machines.
plasterboard insTalacers must hang and complete these products to create the desired structure or design. The plasterboard leaves are suspended from wood or metal members of the wall framing using screws or nail plasterboard. They can also be connected to ceilings or masonry walls using clips of metal channels. For the application of plasterboard to ceilings or sections of the upper wall, they often use a piece of equipment known as the lift of plasterboard, which provides a sheet of the notice board in place so that it can be attached to the frame members.
After the plasterboard is suspended, it must be completed using other plasterboard products to create a smooth surface. First, the seams are sealed between each sheet using a plasterboard tape. The tape is then covered with a dense paste known as a joint compound or a gypsum. After the mud has dried, the walls are cut to smooth and even out of the surface. Installers plasterboard can add layers of joint compounds to create a textured look or walls can be for painting Htuned.