What are the different methods of checking termites?
Termites are a common pest in different regions of the world and the damage they cause can be devastating. This insect may seem virtually invisible and sometimes it can be very difficult to detect. They have the potential to destroy virtually any structure, from small houses to large buildings if it is unnoticed and is not treated. There are different types of territe controls designed to alleviate the termite problem, and each requires experts and specialized equipment and chemicals. This is known as preliminary treatment and includes the use of termiticid or termitic kills chemicals on the soil where the house or building should be built. The primary advantage of this type of termite control is that it is much cheaper than the treatment of termites on existence structure, which can also be seriously damaged by thermit if it remains unnoticed. The soil is simply sprayed with long -term pesticides while building a foundation, and covers virtually every point where thermites can enter, especially the corners that canou be difficult to achieve after completion of the house or building.
6 One of the methods of checking the termites is the bait through which the infestation is eliminated by baits that attract and kill problematic pests. The company using baits will often have to perform several visits to ensure that the traps do their work, and the process can take several weeks for the whole year to take care of them. The baits can also be used in conjunction with a termiticide that are designed to kill in contact.Another way to check the termites is the use of soil barriers, which are similar to the methods of pre -treatment, only after the structure is formed. To build a barrier between the house and the attic that reflects or kills the population, and as soon as they are introduced, there may be several methods to create a barrier between the house and the attic. One of them is the Sub-Desky method through which holes are drilled in the base and the pesticides of the APLThey do not enter the soil under the structure.
Another method of application for the soil barrier is a trench or a ditch digging around the foundations of the house and then filled with dirt that was treated. Finally, there is a rod where the rods are inserted at the intervals around the base, through which pesticides are applied. Rodding is one of the least effective methods due to gaps between intervals, but different combinations of methods are often used based on the type of type of type. Foam is another relatively new method of checking termites, where termiticides are converted into foam material and injected into a problem area of home.